top of page

GS PIR D roof panels are designed for roofing. They are characterized by a very deep profiling of the trapezoidal outer cladding. This is related to the transmission of long-term service loads. The boards are fastened with screws to the wooden, steel or reinforced concrete structure. The minimum roof pitch is 3 ° (5.2%) without skylights and 5 ° (8.7%) for covering panels joined along their length. The plate cladding is galvanized steel sheet on both sides according to EN 10346 with organic polyester varnish with a coating thickness of 25 μm. The modular width of the panel is 1000 mm, and its standard lengths range from 2.0 m to 12.0 m. On special customer request, we supply panels shorter than 2.0 m and longer than 12.0 m, with a maximum length of 16.5 m. The tightness of panel joints is ensured by the PUS polyurethane gasket applied at the production stage.


    • The profiling of the metal cladding makes the walls look aesthetically pleasing
    • A large radius of cladding profiling ensuring the integrity of the protective coatings
    • Continuous polyurethane gasket applied during the production process
    • Protection chamber against water capillary action
    • Core made of rigid PIR foam with very good thermal insulation and fire properties
    • Contoured edges facilitate assembly and increase thermal insulation
    • Continuous polyurethane gasket maintaining high thermal insulation. It was applied during the production process
    • Aluminum foil prevents the penetration of water vapor into the core of polyisocyanurate foam
  • Thickness [mm]

    40/80 - 60/100 - 80/120 - 100/140 - 120/160 - 150/190 - 160/200

    Mass* [kg/m2]

    10,8         11,6         1 2,4            13,2            14,0            15,2             15,6

    Modular width [mm] 1000

    Ratio Ud,S [W/m2K] for PIR

    0,55       0,37        0,27            0,22            0,18             0,15            0,14

    B-s1, d0 BROOF

Related Products